Fiberglass axial flow fan Because of its light weight, low defect sensitivity, good impact resistance, the natural frequency of vibration can be designed and low noise. It has been widely used in many ventilation systems. Leaf blade made of other materials. It is particularly important to choose a reasonable mold structure and adopt the correct method of handling on the basis of the torsion angle, the linear aerodynamic efficiency, the strict requirements, the surface quality and the blade forming die. The impeller of glass fiber reinforced plastic axial flow fan is made of glass fiber reinforced plastic composite.
Fiberglass axial flow fan The utility model has the advantages of simple structure, low noise, easy installation, good anticorrosive performance, high static pressure and high efficiency, stable operation and small mechanical vibration. It is widely used in acid pickling section, laboratory, basement, power plant, electroplating and oxidation plant. It also applies to industrial and mining enterprises, warehouses, office buildings and houses for general ventilation. It can be applied to the installation of longer pipeline intervals in series so as to increase the pressure inside the pipeline. Gas is not allowed to contain viscous substances, dust and hard particles. The temperature of the gas is less than 150mg\ / m3 or less than 60 degrees, and the relative humidity is less than 100%.
Tags: Fiberglass axial flow fan Exhaust fan Diagonal flow fan