Anticorrosive axial flow fan is an axial flow fan made of FRP anticorrosive material, which has low power consumption, low noise and excellent corrosion resistance characteristics. It is suitable for working environments with corrosive gas emissions, such as industrial plants, machinery manufacturing, chemical industry, printing and dyeing, electroplating, medicine and other occupations.
The anticorrosive axial fan should have a comprehensive inspection of components when assembling.
1. the anticorrosive axial flow fan can be artificially controlled. After the main motor is stopped, the anticorrosive axial flow fan can still work, so that the main motor can be fully cooled.
Two Anticorrosive axial flow fan Not only the speed is high, but also the air pressure is large, so the cooling effect is greatly enhanced. Under the same setting temperature and load current, the temperature of the main motor is reduced by twelve degrees Celsius.
3., the insulation aging rate of the main motor of the axial-flow fan is reduced, and the age of its use is extended. Whether the parts are intact, whether the rotation direction of the impeller and the shell are common, whether the joints are closely connected, whether the main parts such as impeller, spindle, bearing and so on are harmless, and whether the transmission group is sensitive or not. If problems are found, they should be repaired and adjusted immediately.
4. as far as possible, the load distribution of the two buses is balanced, so as to prevent a bus bar from overloading due to overloading.
Tags: Anticorrosive axial flow fan Fiberglass axial flow fan Axial fan